lunduniversity.lu.se

Forskar­utbildnings­kurser

Faculty of Engineering | Lund University

Detaljer för kurs MAM030F Nanosafety

Utskriftsvänlig visning

Allmänt
  • MAM030F
  • Tillfällig
Kursnamn
  • Nanosafety
Kursomfattning
  • 5
Undervisningsform
  • Ren forskarutbildningskurs
Administrativ information
  • 7324 (Department of Design Sciences / Ergonomics and Aerosol Technology)
  • 2019-02-07
  • Mats Ohlin

Aktuell fastställd kursplan

Allmänt
Syfte
  • The aim of the course is to mediate knowledge of safe manufacturing and handling of engineered nanoparticles and of nanomaterials i.e. materials containing nanoparticles, in the perspective of human health and of environment. Aspects such as safety important particle characteristics, exposure- and emission assessment, nano toxicology, precautionary principle, safe-by-design, human-technology interaction, risk assessment, risk management, risk communication, life cycle analysis, legislation, and ethical aspects will be covered.
Innehåll
  • Particle properties (size, shape, aspect-ratio, solubility, chemical composition), lung deposition and clearance, emissions, exposure, toxicity, risk management, human-technology interaction, biomarkers, engineering controls and personal protection, risk- and safety communication, food chain transport, life cycle analyses, ethical aspects, and legislation.
Kunskap och förståelse
  • För godkänd kurs skall doktoranden
  • be able to describe the concept of risk and how risk can be assessed in different stages (production, incorporation in consumer product, handling of product, end-of-life) of an engineered nanoparticle/nanomaterial
    be able to describe the concepts of precautionary principle and safe-by-design and how these concepts are employed in the nano technology research and development
    be able to connect different properties of an engineered nanoparticle/nanomaterial to human uptake through skin, lung and gastrointestinal tract
    describe the connections between handling of nanoparticle-containing products, nanoparticle emissions and environmental exposure
    describe basic mechanisms and health endpoints related to nanoparticle toxicity
Färdighet och förmåga
  • För godkänd kurs skall doktoranden
  • be able to carry out simple measurements of airborne nanoparticles and understand the results
    orally and in writing, with authority, be able to communicate safety aspects of nano technology research and development
    have compiled basic strategies, and motivations to these, to work towards implementing safe-by-design
Värderingsförmåga och förhållningssätt
  • För godkänd kurs skall doktoranden
  • be able to choose and motivate instruments to design an occupational exposure measurement
    demonstrate insight into the possibilities and limitations of research with a set of toxicological approaches (human, animal models, cell studies)
    be able to judge and interpret risk assessments related to production and handling of nanoparticles and nanomaterials.
    be able to identify knowledge gaps in nanosafety
    be able to discuss ethical and legal considerations related to nanosafety
Undervisningsformer
  • Föreläsningar
  • Laborationer
  • Projekt
  • Litteraturkurs som självstudier
Examinationsformer
  • Skriftlig rapport
  • Inlämningsuppgifter
  • Seminarieföredrag av deltagarna
  • Detailed description of the different examination formats: 1) Approved individual home assignment before course start (summarize two scientific papers), and discussion of these in groups at start of course week 1; 2) 80% minimum participation to the lectures (1.5 weeks); 3) Approved group task to be done between course week 1 and course week 2, presented in writing and orally during course week 2; 4) Participation in laboratory exercise; 5) Approved final home assignment after course week 2 (hazard identification connected to doctoral student’s own research).
  • Underkänd, godkänd
Förkunskapskrav
  • The course is open for all PhD students within the fields of engineering, science, and medicine. The course is also open for representatives from industry and legislation, as well as master students with a documented interest in nanosafety, or doing there master's thesis in this field.
Förutsatta förkunskaper
Urvalskriterier
Litteratur
  •  
  • Course literature will be provided by the lecturers.
Övrig information
  • This course overlaps completely with Part 1 in the course Nanosafety – with Project (MAM035F, 7.5 hp). Part 2 of the course MAM035F is a project work and is thus not included in this course.
Kurskod
  • MAM030F
Administrativ information
  • 2022-08-29
  • Åsa Håkansson

Alla fastställda kursplaner

2 kursplaner.

Kurskod ▼ Kursnamn ▽ Avdelning ▽ Inrättad ▽ Gäller från och med ▽ Första inlämning ▽ Andra inlämning ▽ Fastställd ▽
MAM030F Nanosafety Ergonomics and Aerosol Technology 2019‑02‑07 Spring 2019 2019‑02‑06 11:29:31 2019‑02‑06 16:38:51 2019‑02‑07
MAM030F Nanosafety Ergonomics and Aerosol Technology 2022‑08‑29 Autumn 2022 2022‑06‑08 20:32:02 2022‑06‑08 21:34:19 2022‑08‑29

Aktuellt eller kommande publicerat kurstillfälle

Inget matchande kurstillfälle hittades.

Alla publicerade kurstillfällen

1 kurstillfälle.

Kursplan giltig från Startdatum Slutdatum Publicerad
Spring 2019 2019‑04‑23 (ungefärligt) 2019‑06‑28

Utskriftsvänlig visning