Introduction to Isothermal Calorimetry
Introduktion till isoterm kalorimetri

VBM001F, 4.5 högskolepoäng

Gäller från och med: Spring 2013
Beslutad av: FN3/Per Tunestål
Datum för fastställande: 2013-05-06

Allmänna uppgifter

Avdelning: Building Materials
Kurstyp: Ren forskarutbildningskurs
Undervisningsspråk: English

Syfte

The primary aim is to give the participants an overview of isothermal calorimetry and how this measurement technique can be used in different fields of science and technology. After the course the participants should be able to use an isothermal calorimeter. Secondary aims are to encourage participants to: • collaborate cross-disciplinary (for example, students of chemistry working together with students of civil engineering). • read literature in other fields than their own. • develop ad hoc experimental procedures and instrumentation.

Mål

Kunskap och förståelse

För godkänd kurs skall doktoranden

• To pass the course a participant must:
• • be able to describe the essential features of an isothermal (heat conduction) calorimeter (thermostat, heat flow sensor, reference, calibration coefficient, baseline, time constant, electrical calibration by the steady state method, stability and resolution of instruments, choice of reference).
• • know the most common uses of isothermal calorimetry (cement hydration, stability/degradation, titration, heat capacity measurements…).
• • know the most common sources of error in isothermal calorimetry (evaporation, friction, pressure-volume work…).
• • have a knowledge of basic concepts of chemistry (pH, rate constants and rate laws, equilibrium constant & law of mass action, enthalpy, heat capacity, heat, thermal power, activation energy).
• • be able do basic evaluation of results of six types of calorimetric measurements:
• 1. Qualitative assessment of influence of additive (cement hydration retardation, food preservative…).
• 2. Integrated heat of a process (cement hydration, biological experiment…).
• 3. Rate of degradation from thermal power and enthalpy.
• 4. Heat capacity from drop-cp measurements.
• 5. Rate constant and enthalpy from thermal power from first order reaction.
• 6. Activation energy from calorimetric measurements at several temperatures.

Färdighet och förmåga

För godkänd kurs skall doktoranden

• The participants should improve their skills during the course. This cannot only be tested in an examination, and is therefore mainly assessed from a participant's activity during the course. To pass the course a participant should:
• • be able to identify the critical parts of a proposed experiment with isothermal calorimetry and make reasonable simple calculations about whether an experiment is worth trying.
• • show basic laboratory skills and judgement concerning such issues as laboratory safety, notekeeping, keeping order in workspace during experiment, and leavning workspace in good order after experiment.
• • be able to discuss the experiments, both their own and thise of the other participants.

Värderingsförmåga och förhållningssätt

För godkänd kurs skall doktoranden Engage with the experimental problems that arises during the course and have an open mind concerning their own experiments. It is also essential that the participants can value their results, both in terms of trueness and scatter.

Kursinnehåll

Practically all processes - physical, chemical and biological - are accompanied by energy changes expressed as release or uptake of heat. These changes may be determined by calorimetric measurements and calorimetry is therefore a measurement technique that can be used in all fields of science and technology, for example for: Stability measurements of explosives, oxidative agents etc. Heat capacity measurement on solids and liquids. Compatibility testing, e.g. of chemicals and packaging materials Sorption of vapors on solids like textiles, pharmaceuticals, food stuffs etc. Microbial growth in different types of food Mapping of phase diagrams Cement hydration as a function of water-cement ratio, temperature, additives etc. Battery efficiency as a function of discharging program Corrosion of metals in gas and liquid Enthalpy of vaporization of water and other liquids Seed and grain germination In this course I will give an introduction to calorimetry with the focus on isothermal (non-scanning) calorimetry. The course will include lectures, experimental work and text studies. The course will run one full week with lectures, discussions and experiments. After this the participants shall read some literature and make an exam (or home exam for those who are not in Lund at that time). The experiments will be made on isothermal calorimeters at Division of Building Materials.

Kurslitteratur

Scientific papers.

Kursens undervisningsformer

Undervisningsformer: Föreläsningar, seminarier, laborationer, litteraturkurs som självstudier. An intensive course-week and a one day combined lab-report-discussion and a written exam.

Kursens examination

Examinationsform: Skriftlig tentamen. Activity during experimental part of course.
Betygsskala: Underkänd, godkänd
Examinator: Professor Lars Wadsö

Antagningsuppgifter

Förkunskapskrav: All PhD-students at engineering, science and medical departments are qualified
Förutsatta förkunskaper: None
Minsta antal deltagare: 4
Begränsat antal platser: 20
Urvalskriterier: A limited number of participants (normally 8).

Övrig information

Lars Wadsö, Building Materials LTH (lars.wadso@byggtek.lth.se)

Kurstillfällesinformation

Startdatum: 2016-01-15. Startdatumet är ungefärligt.
Slutdatum: 2016-06-30
Kursfart: Not specified

Anmälningsinformation

Register for the course to lars.wadso@byggtek.lth.se

Kontaktinformation och övrigt

Kursansvarig: Lars Wadsö <lars.wadso@byggtek.lth.se>
Övrig information: The course is given when there are participants.